ArcMeister Lampen


	ArcMeister Lamps
	High-Output
	High-CRI
	High Stability
	Ballast
	AC
	DC
	Exterior
	FGM Technology
	Fiber Box PTX-60
	Lamp Comparison
	TechnoLab GmbH is exclusive PEC Lamp distributor for Europe

	TechnoLab GmbH Am Borsigturm 46 13507 Berlin Tel:(030)43033160 Fax:(030)43033169


Green Energy Lighting Corp 11266 Monarch St. Garden Grove, CA 92841 Ph:800-211-5483 Fx:714-889-4128

F66C18 - High Stability HID (Type F) 1.5mm Bogenlänge
The F type lamp was developed specifically to aid inspection in scientific apparatur. It is something of a compromise between the high putput and the high CRI types. It has a color tempreature of 4500K and achieves a CRI in the 50s. Its cool white light with rich blue component makes it especially suitable for inspection tasks, and it has already found a niche providing high contrast images for machine vision systems .
VERDICT: Not for designers, but industrial users.

Download Datasheet

1. General Specification

Category	Standard Rating	Frequency	Numbers per Inspections	Method
Wattage	60W
Dimmer Range	40W±80W
Voltage	62V±15V	per lot	1 /Charge (min. 1 / 20St)	Tester
Initial Lumen	3200lm±800lm	per lot	1 /Charge (min. 1 / 20St)	Spectrometer
Light Flickering	less than 5%	per lot	1 /Charge (min. 1 / 40St)	Measured the light from fiber Φ 8mm x 300mm. Operating position: perpendicular Measured for 10 min. after 5 min. of operation.
Warm-Up Time	60sec	per lot	1 /Charge (min. 1 / 40St)	Measured when lumen reaches 80%
Color Temperature	7400K±1500K	per lot	1 /Charge (min. 1 / 40St)	gMeasured the light from fiber Φ 8mm x 300mm
CRI	85K±10(Ra)			Measured the light from fiber Φ 8mm x 300mm
Avg. Life*	4000 hr

* Avg Life: Rating is the point where lumen reaches 50% of the initial lumen.

2. Working Distance

* Working Distance (WD) is defined as the distance from surface of the reflector, where the light comes out, to the fiber source. Working Distance is set to 40mm which is the most ideal distance in order to get a maximum lumen output at the other end of the fiber souce.

3. Operating Condition

Category	Operating Condition	Remarks
Operating Position	Perpendicular, allowing ±90° toward lighting direction	Lumen and Lumen Stability may drop 0-10% due to slight tilt
Operating Environment (Temperature )	0°C - 60°C (32°F-140°F)
Warm-Up Time	45 sec+	Re-strike may fail when turned on in less than 45 sec

4. Reliability Test

Category	OperatingCondition	Remarks
Working Condition Under High Temperature & High Humidity	Ambient Temperature: 40°C (104 F)
	Ambient Humidity: 80% RH
	Wattage: 100W (Standard + 40W)
Storing Temperature (Extreme High)	Ambient Temperature: 80°C (176 F)
	Stored for 100 h
Storing Temperature (Extreme Low)	Ambient Temperature: -20°C (-4 F)
	Stored for 100 h
Turned ON/OFF Intermittently	Ambient Temperature: Room Temperature	-
	Ambient Humidity: Average
Shock Test	Dropped from 31.5 in. from the floor	-
	Tested on each dimension
	Tested 10 times on concrete and linonium
Vibrations Test	Lamp direclty attached to Vibration Testing Machine	-
	10G 5-500Hz 7.5min

5. Warranty

Warranty Period: 400 hrs of operating period or 6 months from the date of purchase.
PEC LAMP will repair/replace defective item(s) within our warranty and/or PEC LAMP's extended warranty period (if applicable). For PEC LAMP's warranty to be in effect, product must have been used for it's inteded purpose through normal use. Defects which result from negligence, misuse, or accidents or if product is determined by one of our technicians that it was misused will not be covered under warranty. Due to PEC LAMP's requrements and return guidelines, all products being returned for warranty or reselection purposes must include manuals, cables, and packaging in its original condition. We reserve the right to make all final decisions on repairs or exchanges.