ArcMeister Lampen


	ArcMeister Lamps
	High-Output
	High-CRI
	High Stability
	Ballast
	AC
	DC
	Exterior
	FGM Technology
	Fiber Box PTX-60
	Lamp Comparison
	TechnoLab GmbH is exclusive PEC Lamp distributor for Europe

	TechnoLab GmbH Am Borsigturm 46 13507 Berlin Tel:(030)43033160 Fax:(030)43033169

Green Energy Lighting Corp 11266 Monarch St. Garden Grove, CA 92841 Ph:800-211-5483 Fx:714-889-4128

R66C17 - High CRI Lamp (Type R) 2.0mm Arc Gap
High CRI Lamp is the lamp which will be of prime interest to the lighting industry. Based on metal halide technology it is optimised to show off objects in their truest colours. Its crisp 6000K daylight color temperature has already seen it established as a display lamp in its own right. A number of American jewelry stores rely on its awesome intensity and cool white light to add that crucial sparkle to their display windows and showcases. In this format it can be used either as a stand-alone reflector display lamp, or as a very desirable source in fibre optic illumination systems. When used to drive fibre optic systems in display lighting, its stepc change in colour temperature really provides a stark contrast against traditional installations using halogen or 3000K to 4000K metal halide lamps.
*Also available with 1.5mm Arc Gap

Download Datasheet

1. Genereal Specification

Category	Standard Rating	Frequency	Numbers per Inspection	Method
Wattage	60W
Dimmer Range	60W
Voltage	50V±15V	per lot	1 /Charge (min. 1 / 20St)	Tester
Initial Lumen	3000lm±1000lm	per lot	1 /Charge (min. 1 / 20St)	Spectrometer
Light Flickering	less than 5%	per lot	1 /Charge (min. 1 / 40St)	Measured the light from fiber Φ 8mm x 300mm. Operating position: perpendicular Measured for 10 min. after 5 min. of operation.
Warm-Up Time	60sec	per lot	1 /Charge (min. 1 / 40St)	Measured when lumen reaches 80%
Color Temperature	5900K±1100K	per lot	1 /Charge (min. 1 / 40St)	Measured the light from fiber Φ 8mm x 300mm
CRI	85K±10(Ra)			Measured the light from fiber Φ 8mm x 300mm
Avg. Life *	4000 h

*Avg Life: Rating is the point where lumen reaches 50% of the initial lumen.

2. Working Distance

* Working Distance (WD) is defined as the distance from surface of the reflector, where the light comes out, to the fiber source. Working Distance is set to 40mm which is the most ideal distance in order to get a maximum lumen output at the other end of the fiber souce.

3. Operating Condition

Category	Operating Condition	Remarks
Operating Position	Perpendicular, allowing ±90° toward lighting direction	Lumen and Lumen Stability may drop 0-10% due to slight tilt
Operating Environment (Temperature )	0°C-60°C (32 F - 140 F)
Operating Environment (Humidity)	10-80%RH	no condensation
Storing Environment (Temperature)	-20°C- 70°C (-4 F - 158 F)
Storing Environment (Humidity)	5-90%RH	no condensation

Warm-Up Time	60 sec+	Re-strike may fail when turned on in less than 45 sec.

4. Reliability Test

Category	Operating Condition	Remarks
Working Condition Under High Temperature & High Humidity	Ambient Temperature: 40°C (104 F)
	Ambient Humidity: 80% RH
	Wattage: 100W (Standard + 40W)
Storing Temperature (Extreme High)	Ambient Temperature: 80°C (176 F)
	Stored for 100 h
Storing Temperature (Extreme Low)	Ambient Temperature: -20°C (-4 F)
	Stored for 100 h
Turned ON/OFF Intermittently	Ambient Temperature: Room Temperature	-
	Ambient Humidity: Average
Shock Test	Dropped from 31.5 in. from the floor	-
	Tested on each dimension
	Tested 10 times on concrete and linonium
Vibrations Test	Lamp direclty attached to Vibration Testing Machine	-
	10G 5-500Hz 7.5min

5. Warranty

Warranty Period: 400 hrs of operating period or 6 months from the date of purchase.
PEC LAMP will repair/replace defective item(s) within our warranty and/or PEC LAMP's extended warranty period (if applicable). For PEC LAMP's warranty to be in effect, product must have been used for it's inteded purpose through normal use. Defects which result from negligence, misuse, or accidents or if product is determined by one of our technicians that it was misused will not be covered under warranty. Due to PEC LAMP's requrements and return guidelines, all products being returned for warranty or reselection purposes must include manuals, cables, and packaging in its original condition. We reserve the right to make all final decisions on repairs or exchanges.